Helpline

+13326068861

Site Notice: Sincerity , changes in the market , the good faith forever ...
Industry information News

service phone +13326068861

Current situation of supply and demand balance of automobile steering tie rod

文章来源:ju-yee.com    时间:2016-8-24 15:52:19

    Taizhou giant Industry Machinery Co., Ltd. on the automobile steering rod industry supply and demand balance of the status quo has a special view

    Steering pull rod is an important part of automobile steering mechanism. It plays a role in the steering system, which has a direct impact on the stability, safety and service life of the vehicle. The steering tie rod is divided into 2 categories, namely, the steering straight rod and the steering tie rod. The steering rod bears the steering arm movement is transferred to the steering knuckle arm; tie rod is the steering trapezium, the steering wheel is to ensure that the key components produce the correct motion relationship.

    The structure of the steering drag link is mainly 2 kinds: one is the ability to mitigate reverse impact, and the other is not capable, as shown in Figure 2. To ease the reverse impact, in a straight rod ball head is provided with a pressure spring, a spring rod axis and the reverse, as the need to bear the force along the rod axis direction, but also can eliminate the gap of spherical ball pin part and the ball head caused by the abrasion of the bowl. For the second kinds of structure, priority is connected to the rigid rather than ability to mitigate the impact of the characteristics of the structure is the axis and the ball head pin direction pressing spring is positioned at the lower part of the ball head pin of the same, compared with the former, spring force situation improved, only to eliminate the gap caused by the abrasion of spherical part the.

    The steering tie rod in the non independent suspension is different from the structure of the steering tie rod in the independent suspension. (1) the steering tie rod in the non independent suspension of a vehicle in a non independent suspension of a non independent suspension as shown in figure 3. The steering tie rod is composed of a rod body 2 and a transverse rod joint which is screwed at both ends, and the joint structure of the two ends is same. The rear end of the ball head pin 14 is connected with the trapezoidal arm, and the upper and lower ball head seat 9 is made of a poly formaldehyde, and has good wear resistance, and the shape of the C is shown in the figure below. Spring 12 to ensure that the two ball head seat and the ball head in close contact, and the cushioning effect, the preload is 11 adjustment screw. The two connector is connected with the transverse rod body by the screw thread, and the thread part of the joint is cut, so elastic, the joint is screwed to the transverse rod body, and the clamping bolt is clamped by 3. One end of the threaded end of the transverse rod is right-handed, and one end of the transverse rod is left handed. So in loosen the clamping bolt 3, the transverse rod body can turn the change of the total length of the tie rod, so as to adjust the steering wheel before the beam. (2) in order to adapt to the independent suspension, the steering cross bar of the independent suspension must be divided into two or three sections. The rocker 7 front end is fixed to the middle part of the frame beam, and the rear end is connected with the steering straight rod 2 and the left and the right steering transverse rods 5 and 4 by the ball head pin. The outer end of the steering straight rod is connected with the ball head pin 1 of the steering swing arm. The outer end of the left and the right steering tie rods are respectively hinged with the left and the right trapezoid arms 3 and 6, and can swing up and down in the transverse plane with the side wheels relative to the vehicle frame and the rocker 7.

    

Taizhou giant Industry Machinery Co., Ltd. Contact: Mr. Huang Cell phone: 13326068861 Telephone: +86-0576-87507557 Fax: 0576-87568010 Zip code: 317602 E-mail: jy@ju-ye.com Address: Dongfeng Industrial Zone, Kanmen, Zhejiang, Yuhuan County Province
website:ju-yee.com (copy) Taizhou terms machinery co ., LTD - steering track rod, rigfor motor vehicle steering link,steering link assembly,Automotive steering rod assembly