Site Notice: Sincerity , changes in the market , the good faith forever ...
Models show Product

service phone +13326068861

Steering tie rod
  • Steering tie rod

Steering tie rod

  • 原   价
  • 现   价 面议
  • 规   格
  • 浏   览 最近有7707人查看

Steering tie rod

Steering tie rod

The steering tie rod in the non independent suspension is different from the structure of the steering tie rod in the independent suspension.

Steering cross pull rod in (1) non independent suspension

The steering tie rod in a non independent suspension of a vehicle is shown in Figure 3. The steering tie rod is arranged on the two ends of the rod body 2 and is screwed in.

The joint structure of the two ends of the transverse rod is the same. The rear end of the ball head pin 14 is connected with the trapezoidal arm, and the upper and lower ball head seat 9 is made of a poly formaldehyde, and has good wear resistance, and the shape of the C is shown in the figure below. Spring 12 to ensure that the two ball head seat and the ball head in close contact, and the cushioning effect, the preload is 11 adjustment screw.

The two connector is connected with the transverse rod body by the screw thread, and the thread part of the joint is cut, so elastic, the joint is screwed to the transverse rod body, and the clamping bolt is clamped by 3. One end of the threaded end of the transverse rod is right-handed, and one end of the transverse rod is left handed. Therefore, loosen the clamp bolt 3, turn of the tie rod body can change the total length of the tie rod, so as to adjust the steering wheel before the beam.

(2) steering tie rod in independent suspension

In order to adapt to the independent suspension, the steering ladder must also be divided into two or three sections.

Red flag CA7560 car is used in the above a program,

The rocker 7 front end is fixed to the middle part of the frame beam, and the rear end is connected with the steering straight rod 2 and the left and the right steering transverse rods 5 and 4 by the ball head pin. The outer end of the steering straight rod is connected with the ball head pin 1 of the steering swing arm. The outer end of the left and the right steering tie rods are respectively hinged with the left and the right trapezoid arms 3 and 6, and can swing up and down in the transverse plane with the side wheels relative to the vehicle frame and the rocker 7.

Taizhou giant Industry Machinery Co., Ltd. Contact: Mr. Huang Cell phone: 13326068861 Telephone: +86-0576-87507557 Fax: 0576-87568010 Zip code: 317602 E-mail: Address: Dongfeng Industrial Zone, Kanmen, Zhejiang, Yuhuan County Province (copy) Taizhou terms machinery co ., LTD - steering track rod, rigfor motor vehicle steering link,steering link assembly,Automotive steering rod assembly